Description

Weatherall Log Guard Interior Clear Coat

Log Guard Interior Clear Coat is the chillest way to keep your log home’s insides looking like a million bucks without the chemical warfare or finicky cleanup. This satin or gloss-clear finish doesn’t just sit there looking pretty—it penetrates deep into bare or stained wood, forming a flexible, breathable shield that laughs at UV rays, moisture migration, and time itself. No yellowing (thanks to serious UV blockers), no sticky buildup, no “what’s that smell?” complaints from guests. Low VOC means you can apply it while living in the space—no evacuations, no headaches, just fresh air and happy lungs.

Picture your cabin’s great room: hand-hewn logs gleaming with natural warmth, not dulled by grime or faded by sunlight streaming through picture windows. Log Guard steps up with one-coat coverage (2 coats optimal) using a brush, or roller—dries touch-dry in 1 hour, recoat in 4-6 hours, fully cured in 7 days. Soap and water cleanup? Yes please—leave the mineral spirits for your ex’s bad decisions. Available in satin and gloss, it enhances grain without fake shine, perfect for bare Douglas Fir, Pine, Cedar, or over Weatherall stains. Handles high-traffic areas like floors, railings, mantels, even ceilings without chipping or peeling. **High-Traffic Areas: If you are applying this to floors or stairs, wait at least 24–48 hours before walking on it with socks, and avoid heavy furniture or shoes until the full 7-day cure is complete.

Humor alert: Unlike those “premium” finishes that reek like a skunk convention and demand gloves/masks/respirators, Log Guard’s user-friendly vibe means your crew won’t mutiny mid-job. “Hey Bob, pass the caulk—no wait, pass the sealer that doesn’t make us gag!” Low VOC (<50 g/L), non-toxic once cured, and mildew-resistant for humid basements or lakeside cabins. Light sanding-between-coats with fine sandpaper, highly durable on walls and ceilings, interior maintenance cycles typically run every 2–5 years depending on UV exposure. A “10-15 year” or longer lifespan is possible in low-exposure areas, but high-traffic floors generally require more frequent maintenance coats, and zero tannin bleed on light woods. Coverage? 250-400 sq ft/gallon per coat—big living rooms done fast. From Montana log builders to nationwide retreats, this clear coat turns maintenance headaches into “set it and forget it” wins—beautiful, breathable, built to last.

Why It Rules the Jobsite

• UV blockers + deep penetration = zero yellowing for 2-5 years—logs stay fresh-faced.

• Soap/water cleanup kills turpentine hell; low VOC means no “aroma evacuations”.

• One-coat wonder (2 optimal/recommended) with fast dry—finish rooms while clients sip coffee nearby.

• Breathable/flexible formula handles wood movement without cracking like bad relationship advice.

Technical Specs

• Finish: Satin or Gloss

• Coverage: 250-400 sq ft/gal per coat for subsequent coats on smooth wood. However, the first coat on rough-sawn or hand-peeled logs typically covers less—between 150–300 sq. ft./gallon.

• Dry Times: Touch 1 hr, recoat 4-6 hrs, cure 7 days

• VOC: <50 g/L (ultra-low)

• Application: Brush, roller, sprayer *(always back brush); 1-2 coats

• Cleanup: Soap and water

• Suitable Woods: Bare/stained logs (Pine, Cedar, Fir, etc.)

• Sizes: 1 gal, 5 gal

Order Weatherall Log Guard Interior Clear Coat now and give your logs VIP protection—beautiful, breathable, no-stink shine that lasts decades!